Taking an X-Ray

 Taking an X-Ray


1. Explain the procedure to the patient. Make sure the patient removes all jewelry and other articles that the x-rays cannot pass through.

2. Position the patient on the x-ray table so that the part of the body that needs to be imaged is facing the x-ray apparatus.

3. Lay protective matting over the areas of the patient's body that are not being x-rayed. Leave the part to be imaged exposed.

4. Position the x-ray machine over the part of the body to be imaged. Place the apparatus at the correct height and angle over the body.

5. Use the tape to measure the thickness of the part of the body to be x-rayed. Adjust the controls on the x-ray machine to produce images having the correct density, detail, and contrast.

6. Place the x-ray film under the exposed part of the body to be imaged.

7. Go into the control room, close the door, and activate the control that takes the x-ray image.

8. Remove and develop the film. When it is done, take it to the radiologist.


7. As an x-ray technician, what do you do immediately after positioning the patient on the x-ray table?

A. Put film under the body.

B. Put patient jewelry in a safe place.

C. Put protective mats on areas of the body not being x-rayed.

D. Expose the body part to the rays from the x-ray.

E. Make sure the x-ray machine is at an angle.


8. Where are you, as a technician, when the actual x-ray is taken?

F. in a control room

G. with the radiologist

H. adjusting the x-ray controls

J. measuring for density and detail

K. in a darkroom developing x-ray film


TRẢ LỜI CÓ GIẢI THÍCH


Câu 7: Đáp án C – Put protective mats on areas of the body not being x-rayed.

Giải thích: Theo thứ tự các bước, bước 2 là đặt bệnh nhân lên bàn chụp X-quang, và bước 3 (ngay sau đó) là "Lay protective matting over the areas of the patient's body that are not being x-rayed" — tức đặt tấm bảo vệ lên các vùng cơ thể không cần chụp.


Câu 8: Đáp án F – in a control room.

Giải thích: Bước 7 nói rõ "Go into the control room, close the door, and activate the control that takes the x-ray image." — kỹ thuật viên phải vào phòng điều khiển trước khi kích hoạt chụp ảnh.


MỘT SỐ TỪ MỚI TRONG BÀI


x-ray - tia X, chụp X-quang

procedure - quy trình, thủ tục

jewelry - đồ trang sức

apparatus - thiết bị, máy móc

protective matting - tấm lót bảo vệ

imaged - được chụp ảnh

exposed - để lộ ra, phơi ra

thickness - độ dày

density - độ đậm đặc, mật độ

contrast - độ tương phản

activate - kích hoạt

radiologist - bác sĩ X-quang

develop (film) - tráng phim, rửa phim

darkroom - phòng tối


CÁC CỤM TỪ MỚI (dùng từ vựng trong bài)


1. x-ray technician → work as an x-ray technician (làm việc với tư cách kỹ thuật viên X-quang)

2. explain the procedure → explain the procedure to the patient (giải thích quy trình cho bệnh nhân)

3. remove jewelry → make sure the patient removes all jewelry (đảm bảo bệnh nhân tháo hết trang sức)

4. position the patient → position the patient on the x-ray table (đặt bệnh nhân lên bàn chụp X-quang)

5. protective matting → lay protective matting over the body (đặt tấm lót bảo vệ lên cơ thể)

6. correct height and angle → place the apparatus at the correct height and angle (đặt máy ở độ cao và góc độ đúng)

7. measure the thickness → use the tape to measure the thickness (dùng thước để đo độ dày)

8. adjust the controls → adjust the controls on the x-ray machine (điều chỉnh các nút điều khiển trên máy X-quang)

9. control room → go into the control room (đi vào phòng điều khiển)

10. develop the film → remove and develop the film (lấy và tráng phim)

Nhận xét

Bài đăng phổ biến từ blog này

Those Who Live Without Discipline, Die Without Honor by Modern Arjuna

15 LESSONS FROM RICH DAD POOR DAD by ROBERT T. KIYOSAKI

11 cách giúp bạn học tiếng Anh giao tiếp tại nhà